image
image
image

Contact Info

Subscribe & Follow

Gasin Products

Tasluja Cement

Baziani OPC

Baziani (OPC) awarded the Iraqi Quality Certificate (1/2024/15) is a dark grey very fine powder, which is produced by grinding Clinker with a small amount of Gypsum and Limestone. This product is engineered and produced to become a premium quality and cost-effective building material. It is a general-purpose cement suitable for all the applications, where the special properties of other types of cement are not required. Baziani (OPC) exceeds all the applicable requirements of IQS 5:2019 and EN 197-1:2011 for CEM I 42.5 R.

  • Consistent quality
  • High early strength and final strength
  • Cost effective
  • Early demolding
  • Low Permeability
  • Low Alkali
  • No Bleeding
  • High degree of fineness
  • High cohesion capacity
  • High durability
  • Ready mix concrete
  • Cast-in-place plain and reinforced concrete
  • Pre-cast and pre-stressed concrete
  • Concrete masonry units (concrete blocks)
  • High performance concrete
  • Masonry mortars, and renders
  • Dry mix mortar such as, tile adhesive, non-shrinkage grout, self-leveling grout, etc.
Tasluja Cement

Muqaum Tasluja (SRC)

Muqaum Tasluja (SRC) is a grey fine special cement, which is produced by intergrading Clinker with a small amount of Gypsum and Limestone. The production process of this product has been engineered to make it a very special cement with the highest quality and cost-effective building material. This product shall be used in special areas, where the concrete is prone to direct contact with soil, groundwater, or anything that has a high level of sulfate. Muqaum Tasluja (SRC) exceeds all the applicable requirements of IQS 5:2019 and EN 197-1:2011 for CEM I 42.5 R – SR 3.5.

  • Consistent quality
  • Cost effective
  • Early demolding
  • Excellent durability
  • High cohesion capacity
  • High early strength and final strength
  • High sulfate resisting properties
  • Low Alkali
  • Low Permeability
  • No Bleeding
  • Blinding / Plain Cement Concrete (PCC)
  • Cast-in-place plain and reinforced concrete
  • Concrete pipes
  • Dams and mass concrete
  • Foundation
  • Marine concrete
  • Piles
  • Precast concrete products such as, Krebstone, beharton and Curbstone, manholes & chambers, etc.
  • Ready mix concrete
  • Roads
  • Sewage treatment structures
  • Structures that are prone to high levels of sulfate
  • Underground structures
Tasluja Cement

Bina Tasluja

Bina Tasluja is a grey very fine powder, which is produced by grinding Clinker with 6% to 20% by mass Limestone and a small amount of Gypsum. This product has been designed and produced with a premium quality to improve construction practices and become an environmentally friendly product. It is a general-purpose cement suitable for a very wide range of applications, and it offers a reduction in the embodied CO2 of the cement. Tasluja Bina by Gasin exceeds all the applicable requirements of Iraqi Central Organization for Standardization and Quality Control (ICOSQC) License No. 7988 and EN 197-1:2011 for CEM II/A-L 42.5 R.

  • Consistent quality
  • High early strength and final strength
  • Cost effective
  • Early demolding
  • Low Permeability
  • Low Alkali
  • No Bleeding
  • Low heat of hydration
  • Low carbon emission
  • High degree of workability
  • High degree of fineness
  • High cohesion capacity
  • High durability
  • Ready mix concrete.
  • Cast-in-place plain and reinforced concrete.
  • Precast and prestressed concrete.
  • Concrete masonry units (Concrete Blocks).
  • Masonry mortars, renders, and plaster.
  • Dry mix mortar such as, tile adhesive, non-shrinkage grout, self-leveling grout, etc.
Tasluja Cement

Sarchnar Cement

Economical and Environmentally Friendly Product

Sarchnar Cement is a high-quality cement product manufactured by Gasin Cement Company. Designed to enhance construction performance while minimizing environmental impact Sarchnar Cement is an eco-friendly, general-purpose cement suitable for a wide range of construction applications. Its formulation contributes to reduced carbon dioxide emissions. Sarchnar Cement is manufactured in compliance with the Iraqi Standard No. 5285:2024 (IQS), issued by the Iraqi Central Organization for Standardization and Quality Control (ICOSQC), and the European Standard EN 197-1:2011 for CEM Il/ B-L 42.5 R.

  • High early and final strength.
  • Delivers greater long-term strength, especially effective in humid environments.
  • Reduces carbon dioxide (C02) emissions by up to 20-30%.
  • Better environmental sustainability.
  • Low reaction temperature, making it suitable for casting in large concrete blocks
  • Low cost.
  • High workability.
  • Used for the production of unreinforced precast concrete elements.
  • Used in brick, block, and thermostone construction.
  • Used in precast products where medium strength requirements are needed.
  • Used in block-making processes.
  • It is used for pouring deep foundations or thick walls.
  • Slow action is preferred to minimize the risk of cracking.
  • Used for interior and exterior plastering applications.
  • It is used in hot regions to minimize rapid reactions.
Tasluja Cement

Baziani SRC

 Baziani (SRC) awarded the Iraqi Quality Certificate (1/2024/15) is a grey fine special cement, which is produced by intergrading Clinker with a small amount of Gypsum and Limestone. The production process of this product has been engineered to make it a very special cement with the highest quality and cost-effective building material. This product shall be used in special areas, where the concrete is prone to direct contact with soil, groundwater, or anything that has a high level of sulfate. Baziani (SRC) exceeds all the applicable requirements of IQS 5:2019 and EN 197-1:2011 for CEM I 42.5 R – SR 3.5.

  • Stability in quality and performance
  • High efficiency
  • Early mold removal
  • Crack resistance
  • High sulphate resistance
  • Low alkali content
  • Resistant to chlorides
  • High durability
  • No water shrinkage
  • Reinforced concrete structures
  • Foundations and bridges
  • Infrastructure and sewer systems
  • Marine works like ports and piers
  • Roads and airports
  • Substructures in aggressive soil
  • High sulphate exposure areas